Using The Flashlight - Xantrex Powerpack 300 Owner's Manual

Using the Flashlight

The XPower Powerpack has a detachable flashlight that
operates for up to 18 hours before needing to be recharged.
To detach the flashlight, push the rim of the flashlight lens
straight back, then swing the light away from the unit.
To replace the flashlight, insert the flashlight base first,
aligning the arrow on the flashlight base with the arrow on
the Powerpack, then click the front of the flashlight into place
(see Figure 3-1).
Figure 3-1 Removing and Replacing the Flashlight
The flashlight recharges whenever the XPower Powerpack is
charging with the AC charger or DC charging cable.
When a source of charging power is not available, you can
recharge the flashlight from the XPower Powerpack internal
battery.
To recharge the flashlight from the XPower Powerpack:
•
While the flashlight recharges, the green Status LED turns
on. When the flashlight is charged, the Status LED turns off.
A fully discharged flashlight takes 10 hours to recharge from
the XPower Powerpack.
Press and hold the Charge Flashlight button for two
seconds.
Using the Flashlight
To replace, align
the arrows and
insert the base first.
Charge Flashlight
button
13