Inflating Small Sports Equipment - Xantrex Powerpack 300 Owner's Manual

3. Turn the compressor off after appropriate pressure is
4. Open the thumb latch and remove the valve connector
5. Check air pressure with a pressure gauge.
Note
relieve pressure on the internal mechanisms.

Inflating Small Sports Equipment

You can use the compressor to inflate small sports equipment
such as soccer balls and footballs.
CAUTION
The XPower Powerpack 300 cannot be used to inflate large
capacity inflatables such as float tubes, large air mattresses, and
inflatable boats. These types of products require extended inflating
times that may damage the compressor.
To inflate small sports equipment:
1. Place the valve connector fully on or into the valve
2. Choose the appropriate nozzle adaptor, insert the nozzle
3. Insert nozzle adaptor into the valve receptacle of the item.
4. Turn the compressor on and inflate to appropriate
WARNING: Fire hazard
Allow the compressor to cool down for 10 minutes after each 10
minutes of continuous operation.
5. Turn the compressor off before removing nozzle adaptor
reached.
from the valve stem.
:
Leave the thumb latch in the open position for storing to
receptacle on the item. Go to Step 4.
OR
If necessary, use a supplied nozzle adaptor.
adaptor into the valve stem and close the thumb latch.
pressure.
from valve stem.
Using the Air Compressor
23