Troubleshooting Reference - Xantrex Powerpack 300 Owner's Manual

Troubleshooting Reference

Troubleshooting Reference
WARNING: Electric shock hazard
Do not remove the cover of the XPower Powerpack or disassemble
the XPower Powerpack. The XPower Powerpack does not contain
any internal user-serviceable parts and attempting to service the unit
yourself could result in electrical shock or burn.
Table 5-1 Troubleshooting reference
Problem
AC appliance
will not
operate;
audible alarm
is not
sounding.
Overload
shutdown
Alarm sounds
36
Possible Cause
AC appliance rated more
than 300 W: the safety
overload has tripped.
AC appliance is rated less
than 300 W: high starting
surge has tripped the
safety overload.
Appliance power
requirements exceed the
capability of the XPower
Powerpack.
XPower Powerpack
battery is nearly
discharged (11.0 V).
If you ignore this warning,
the XPower Powerpack
automatically switches off
when the battery reaches
10.5 V.
Solution
Use an AC appliance with a
power rating less than 300 W.
AC appliance may exceed the
XPower Powerpack's surge
capability. Use an AC appliance
with a starting surge within the
XPower Powerpack surge rating.
Unplug the appliance and
confirm that the appliance's
power requirement is 300 W or
less before attempting to restart
the appliance.
Turn the AC Power
OFF
Switch and recharge the XPower
Powerpack.
/
ON OFF