Xantrex Powerpack 300 Owner's Manual page 11

Important Safety Information
Precautions for Using Rechargeable
Appliances
CAUTION
The output of the XPower Powerpack 300 inverter is a non-
sinusoidal modified sine wave, which is different from pure sine
wave utility-supplied electricity. Certain types of load equipment
may be damaged.
Most rechargeable battery-operated equipment uses a
separate charger or transformer that is plugged into an AC
receptacle and produces a low voltage charging output.
Some chargers for rechargeable batteries can be damaged if
connected to the XPower Powerpack 300.
Do not use the following with the XPower Powerpack 300:
•
•
Note
with the XPower Powerpack 300, contact the equipment
manufacturer to determine the rechargeable appliance's
compatibility with the modified sine wave (non-sinusoidal) AC
waveform.
viii
Small battery-operated appliances like flashlights, razors,
and night lights that can be plugged directly into an AC
receptacle to recharge.
Some chargers for battery packs used in hand power
tools. These affected chargers display a warning label
stating that dangerous voltages are present at the battery
terminals.
:
If you are unsure about using your rechargeable appliance