Table of Contents
Advertisement
Fire Alarm Control Panel PL-1000
15.4 System status – history log
1.
Follow the steps to enter in "Configuration" menu, then select "Log".
2.
The events are shared in sequence, the latest is on top and the oldest is on the bottom of the list. Are shown date and time of the events, the type of the events,
the Zone number and the related device address. Are also shown the commands released from the panel.
The arrows indicate:
•
↑ an event has started
↓ an event is finished
•
•
→ a command from the panel was released
3.
Press the back arrow
to go back to the main screen.
52
M-169.1-SERIE-PL-EN / 09.2022
Advertisement
Table of Contents
