Burner sight glass
1
Battery
2
Dosing pump
3
RM 110 container system care
4
Water filter
5
Fuel canister
6
High-pressure hose storage compartment
7
Control panel
8
Burner blower
9
Pressure control
10
Filler opening lid
11
High-pressure pump
12
Oil level sight glass
13
Note
Please note: All types of fuel are simply referred to as "fuel" in
these operating instructions.
20
WRS 200 device overview
Requirements for operating the WRS 200
A suitably large water tank should be available in order to use
the WRS 200.
The water tank must be safely fastened to the rear of the vehi-
cle.
Attention must be paid to the maximum permissible weight
and permissible axle loads of the vehicle when selecting the
water tank.
When the WRS 200 is mounted on the rear of the vehicle, a
counterweight must be mounted on the front bar of the WR
100 Adv (weed elimination accessory) or another suitable
counterweight must be mounted.
According to the attachment guideline, the outer edges must
not protrude more than 400 mm beyond the contour of the ve-
hicle. This is not conformant when no additional attachments
are mounted (not permitted).
Please consult Kärcher-Service in the case of any uncertain-
ties or questions.
English