Example Of 4072/4073 Tester Layout - Agilent Technologies 4072A Advanced Pre-Installation Manual

Site Preparation
Installation Site Requirements

Example of 4072/4073 tester layout

Figure 2-3 provides a system component template sheet to make it easy for you to arrange your system and decide
upon the best layout. Simply cut out, from the template sheet, the system components furnished with your Agilent
.
4072/4073 tester, and arrange them on the blank grid sheet provided in Figure 2-6 One square represents 20 cm by
2
20 cm (approximately 0.43 ft ).
Figure 2-4 and Figure 2-5 show examples of a 4072/4073 tester layout.
Figure 2-7 and Figure 2-8 show layout examples for Tokyo Electron P8 and Accretech A-PM-90A wafer probers,
respectively.
Figure 2-9 and Figure 2-10 show layout examples for Tokyo Electron P12 and Accretech UF300 wafer probers,
respectively.
Figure 2-3 System component template sheet
Chapter 2 15
Agilent 4072/4073 Preinstallation Guide, Edition 4