Shipping Damage - Agilent Technologies 4072A Advanced Pre-Installation Manual

Receiving

Shipping Damage

Shipping Damage
Before unpacking any system components, inspect all boxes for any signs of damage that might have occurred
during shipment. Some typical signs of damage are dents, scratches, cuts, or water marks.
If you suspect damage, note on the bill of lading that there is "Apparent damage -- subject to inspection," and
arrange for both the carrier's representative and a local Agilent customer engineer (CE) to be present when that
item is unpacked.
60 Chapter 4
Agilent 4072/4073 Preinstallation Guide, Edition 4