Agilent Technologies 4072A Advanced Pre-Installation Manual page 46

Wafer Probers and Connection with Testhead
Wafer Probers
Figure 3-3 4072A/4073A Testhead dimensions (1 of 2)
Weight = approx. 75 kg (48 pin)
(include 1m air tube and 1m PS
cables; except output cables)
Units of Measure = mm
LEFT
46
At least 400 mm is necessary so the cables
and air tube can be bent naturally.
Air Hole Area
Air Tube
Air Hole Area
Extended Adapter Area
Personality Board
or Probe Card
Agilent 4072/4073 Preinstallation Guide, Edition 4
Center of Gravity
(with 24 pin boards and 4 MPSMUs)
Handle (removable)
Center of Gravity
(with 24 pin boards and 4 MPSMUs)
The bolts must not be screwed more
than 16mm into the testhead.
BOTTOM
TOP
The bolts must
not be screwed
more than
12mm into the
testhead.
These feet are
removable, but do
not use the holes
for another
purpose.
FRONT
Chapter 3