System 1; System 2; Recipes - Graco Reactor 2 E-XP2 Operation

Advanced Display Module (ADM) Operation

System 1

Use this screen to set the activation pressure for the
Pressure Imbalance Alarm and Deviation, enable or
disable diagnostic screens, set the maximum and
minimum drum volume, and enable drum alarms.

System 2

Use this screen to enable Manual Hose Mode and
inlet sensors, as well as setting the inlet sensor
low pressure alarm and low temperature deviation.
Manual Hose Mode disables the hose temperature
RTD sensor so the system can operate if the sensors
were to malfunction. Default settings are 10 psi (0.07
MPa, 0.7 bar) for low inlet pressure alarm and 50˚F
(10˚C) for low inlet temperature deviation.
34

Recipes

Use this screen to add recipes, view saved recipes,
and enable or disable saved recipes. Enabled
recipes can be selected at the Home Run Screen. 24
recipes can displayed on the three recipe screens.
Add Recipe
1. Press and then use
recipe field. Press
(maximum 16 characters). Press
old recipe name.
2. Use to highlight the next field and use the
number pad to enter a value. Press
Enable or Disable Recipes
1. Press and then use
recipe that needs to be enabled or disabled.
2. Use to highlight the enabled check box.
Press to enable or disable the recipe.
to select a
to enter a recipe name
to clear the
to save.
to select the
333023D