Drive Belts; Qsd 2.0 Drive Belts - Mercury Sterndrive QSD 2.0 Manual

Description
Bravo Three front propeller nut
5. Slide the aft thrust hub onto the propeller shaft with the tapered side toward the propeller hub.
6. Align the splines and install the aft propeller.
7. Install the propeller nut and torque.
NOTE: The propeller torque stated is a minimum torque value.
Description
Bravo Three rear propeller nut
8. Install the propeller shaft anode and screw and torque.
b
a
i
j
g h
Description
Propeller shaft anode screw

Drive Belts

QSD 2.0 Drive Belts

All drive belts must be periodically inspected for tension and condition, such as excessive wear, cracks, fraying, or glazed
surfaces.
Inspecting the belts with the engine running may cause serious injury or death. Turn off the engine and remove the ignition
key before adjusting tension or inspecting belts.
90-8M0069751 APRIL 2012
eng
e
f
d
c
b
25603
5304
WARNING
!
QSD 2.0L front cover removed
a - Serpentine belt
b - Power assisted steering belt
a
Section 5 - Maintenance
Nm lb–in.
136 –
Nm lb–in.
81 –
Bravo Three
a - Rear propeller nut
b - Rear propeller
c - Rear propeller thrust hub
d - Front propeller nut
e - Front propeller
f - Front propeller thrust hub
g - Propeller shaft anode screw
h - Flat washer
i - Star washer
j - Propeller shaft anode
Nm lb–in.
19 168
lb–ft
100
lb–ft
60
lb–ft
–
Page 105