Table of Contents
Advertisement
Description
Alpha sterndrive
gearcase anodic plate
Bravo sterndrive
gearcase anode plate
Alpha and Bravo sterndrive
ventilation plate anode
Alpha and Bravo sterndrive
trim cylinder anodes
Alpha and Bravo sterndrive
bearing carrier anode
MerCathode System
Anode kit (if equipped)
In addition to the corrosion protection devices, take the following steps to inhibit corrosion:
1.
Paint the power package. See Painting Your Power Package.
2.
Annually spray the power package components on the inside of the boat with Corrosion Guard to protect the finish from
dulling and corrosion. You may also spray external power package components.
3.
Keep all lubrication points, especially the steering system, shift, and throttle linkages, well lubricated.
4.
Flush the cooling system periodically, preferably after each use.
90-8M0069751
APRIL 2012
eng
Location
Mounted on the underside of the lower gearcase.
Mounted on the underside of the lower gearcase.
Mounted on the front of the gearcase.
Mounted on each of the trim cylinders.
Located in front of the propeller, between the front
side of the propeller and the gear housing.
The MerCathode electrode, if equipped, is mounted
to the underside of the gimbal housing. The
MerCathode controller is mounted on the engine or
on the boat transom. The controller harness
connects to the electrode harness.
Mounted to the boat transom.
Section 5 - Maintenance
Figure
22405
20336
20338
20342
20343
20340
20341
Page 87
Advertisement
Table of Contents
