Mercury Sterndrive QSD 2.0 Manual page 67

12. Fill the gear lube monitor so that the gear lube level is in the operating range. Do not overfill.
c
a
Sterndrive Model
Bravo One X Diesel
Bravo One XR
Bravo Two X Diesel
Bravo Three X Diesel
Bravo Three XR
Bravo Three (Dual
seawater pickup)
13. Ensure that the rubber gasket is inside the gear lube monitor cap and install. Do not overtighten.
14. Remove the pump from the sterndrive fill and drain plug hole.
15. Quickly install the sealing washer and the fill and drain plug. Tighten to the following specifications.
a
b
90-8M0069751 APRIL 2012
eng
b
Fluid Capacity includes
the Sterndrive and the
Gear lube Monitor
2736 mL (92‑1/2 oz.)
3209 mL (108‑1/2 oz.)
2972 mL (100‑1/2 oz.)
2736 mL (92‑1/2 oz.)
mc79506-1
All Bravo Models Shown
a - Fill and drain plug
b - Sealing washer
b
a
19777
Gear lube monitor
a - Gear lube level at the "ADD" mark
b - Gear lube level at the "OPERATING RANGE" mark
c - Gear lube monitor cap
19947
Fluid Type
High Performance Gear
Lube
Section 5 - Maintenance
Fluid Part Number
92‑858064K01
b
a
14621
Page 59