Table of Contents
Advertisement
1.
The power trim system is protected from overload by a 110‑amp fuse and a 20‑amp in‑line fuse on the power trim pump.
a
2.
The Quicksilver three‑button power trim control panel, if equipped, is protected from overload by a 20‑amp in‑line fuse.
a -
20‑amp in‑line fuse
3.
The Quicksilver MerCathode System, if equipped, has a 20‑amp in‑line fuse in the wire that connects to the positive (+)
terminal on the controller. If the fuse is burned out (blown), the system will not operate, resulting in a loss of corrosion
protection.
a
90-8M0069751
APRIL 2012
eng
b
a -
20‑amp in‑line fuse
19834
Section 2 - Getting to Know Your Power Package
a -
20‑amp in‑line fuse holder
b -
110‑amp fuse
9208
a
Page 21
Advertisement
Table of Contents
