Table of Contents
Advertisement
Section 5 - Maintenance
Installation
1.
Install a new sealing washer on the anode assembly (anode plug with the sacrificial anode).
a
b
2.
Install the anode assembly and washer into the aftercooler end cover. Tighten securely.
3.
Unplug and connect the seawater inlet hose, or open the seacock if equipped.
Without sufficient cooling water, the engine, the water pump, and other components will overheat and suffer damage. Provide
a sufficient supply of water to the water inlets during operation.
4.
Ensure that both the sterndrive and engine seawater pickup pumps are supplied sufficient cooling water.
5.
Start the engine and check for leaks
Page 84
a -
Anode assembly
b -
Sealing washer
19227
Seawater system anode assembly location
NOTICE
25583
90-8M0069751
APRIL 2012
eng
Advertisement
Table of Contents
