Siemens ULTRAMAT 6 Manual page 86

2.7 Optional Module Setup
Flash
EEPROM
firmware
26-pin ribbon cable connector to motherboard
2.8 Installing the Optional Module (Retrofitting)
☛
Note
The firmware in the analyzer may need to be changed.
chapter 6.2
See
☛
Note
With module devices only the A5E00034504 module can be installed for non-intrinsically safe
connection to PROFIBUS-PA and the A5E00019145 module for connection to the PROFIBUS-DP.
ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
A5E00019145 /
A5E00034504 /
A5E00015899 (Exi)
Firmware
Binary inputs/relay outputs
37-pin Sub-D socket
PROFIBUS-PA
9-pin Sub-D socket
PROFIBUS-DP
9-pin Sub-D plug
86