Siemens ULTRAMAT 6 Manual page 116

6.2. Firmware
If it becomes necessary to change the
module (socket module) will have to be replaced.
With CALOMAT 6 analyzers only firmware versions of 1.3.0 or later must be used.
The firmware can be ordered as a spare part with the item number
from CSC Haguenau -> see chapter 6.1:
6.2.1 ULTRAMAT 6, OXYMAT 6, CALOMAT 6, ULTRAMAT 23, OXYMAT 61 Firmware
An update may sometimes be required when the PROFIBUS option is retrofitted:
ULTRAMAT 6
German C79451-A3478-S501
English C79451-A3478-S502
French C79451-A3478-S503
Spanish C79451-A3478-S504
Italian C79451-A3478-S505
OXYMAT 6 and
OXYMAT 61
German C79451-A3480-S501
English C79451-A3480-S502
French C79451-A3480-S503
Spanish C79451-A3480-S504
Italian C79451-A3480-S505
CALOMAT 6
German A5E00092676
English A5E00092677
French A5E00092678
Spanish A5E00092679
Italian A5E00092680
ULTRAMAT 23
All languages C79451-A3494-S501
ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
Firmware
SIEMENS SPA
(software version 4.2 or earlier)
(software version 4.2 or earlier)
(software version 1.1.0 or earlier)
(software version 2.6 or earlier)
due to improvements, the flash EEPROM on the optional
A5E00057164
116