Siemens ULTRAMAT 6 Manual page 100

Diagnosis
The diagnostic messages can be made visible online with the aid of a tool, e.g. SIMATIC HW config
under the "Module Status" menu item.
Standard PROFIBUS-DP mechanisms are used to transport diagnosis information and signaled actively to
the class 1-Master. The DIAGNOSIS parameter from the Physical Block is then available to the master as
diagnostic information. The device states are displayed on the PROFIBUS-PA physical block
bits.
The diagnostic messages can be made visible online in the module status with the aid of a tool, e.g. SIMATIC
HW config. It is also possible to read out the DIAGNOSIS parameter using SIMATIC PDM.
A detailed list can be found in the appendix, chapter 7.4 Diagnosis.
3.1.7 Specific parameters physical block
Specific parameters in physical Block for SIEMENS Gas-analyzer
50 CALIBRATION_DATA
Date
Who
51 PRODUCT_CODE
52 ERRORS
53 WARNINGS
ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
Type
record
octet string
visible string
visible string
octet string
octet string
Number
2
8
24
32
4
2
DIAGNOSIS
100