Siemens ULTRAMAT 6 Manual page 81

2.5 PROFIBUS-DP Bus Connectors
The 9-pin Sub-D male connector (plug connector) enclosed with the device/option is required.
The bus cable can be connected with a solder joint.
Connectors with removable terminal connections are available, for example, from
Company:
Type:
Item no.:
☛
Note
This connector does not have any integrated bus terminators.
Other RS 485 bus connectors are suitable for the PROFIBUS-DP.
s
- order data: (examples)
6GK1 500-0EA02
6ES7 972-0BA11 - 0XA0
6ES7 972-0BA40 - 0XA0
6ES7 972-0BA50- 0XA0
☛
Note
The connector with the axial outgoing cable unit should be used when PROFIBUS-DP and binary
inputs/relay outputs are connected.
ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
Phoenix Contact
SUBCON 9/M-SH
27 61 50 9
axial outgoing cable unit, internal modular terminals
90° outgoing cable unit, internal modular terminals
angled outgoing cable unit, internal modular terminals
90° outgoing cable unit, insulation piercing connecting devices
for FastConnect cables
81