Siemens ULTRAMAT 6 Manual page 75

Qualified Personnel
are, according to this manual, persons who are familiar with the installation, commissioning and operation of
this product and have sufficient qualifications for their work,
for example:
❒
Training or instruction or authorization to switch on/off, ground and label circuits and devices
or systems in accordance with the latest safety standards.
❒
Training or instruction according to the latest standards of safety engineering in the care and
use of suitable safety equipment.
❒
Training in first aid.
❒ For explosion protection:
Training or instruction or authorization to perform work on electrical circuits for systems
where there is a risk of explosion.
7
Warning
The devices may only be installed and commissioned by qualified and qualified personnel.
Safety regulations for systems where there is a risk of explosion must be observed where applicable.
☛
Note
Trouble-free and reliable operation of this device is conditional upon the proper storage, installation
and assembly as well as careful operation and maintenance.
☛
Note
EMC
Screened cables must be used and the screen winding connected to the socket or connector housing
to ensure the specified electromagnetic compatibility.
☛
Note
Setup of PROFIBUS networks
The following manuals describe the setup of PROFIBUS networks:
DP/PA Bus Interface Edition 2
Manual for PROFIBUS Networks
Documentation Package
7
Warning
Equipment with type of protection "Intrinsic Safety" will loose ist approval if it is operated at current
loops which do not comply to the requirements of the EC type conformity examination.
ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
Order number 6ES7 157-0AA00-8AA0 and
Order number 6GK1 970-5CA10-0AA0 (German) or
6GK1 970-5CA10-0AA1 (English)
Order number 6ES7 398-8RA00-8AA0
75