Siemens LMV51 Series Basic Documentation page 133

Representation of parameters based on the AZL5... menu structure, «OEM» level, as supplied by Siemens
Menu level 1 Menu level 2 Menu level 3
Siemens Building Technologies Basic Documentation LMV5...
HVAC Products 7 Display and operating unit AZL5...
Menu level 4 Menu level 5 Menu level 6
IgnitionPosAux3 Ignition position of auxiliary damper 3
IgnitionPosVSD
PostpurgePos
PostpurgePosOil Postpurge position of fuel damper (oil)
PostpurgePosAir Postpurge position of air damper (oil)
Postpurge-
PosAux1
Postpurge-
PosAux2
Postpurge-
PosAux3
Postpurge-
PosVSD
ProgramStop
ResetIgnitPos
IgnitionPosOil
IgnitionPosAir
IgnitionPosAux1
IgnitionPosAux2
IgnitionPosAux3
IgnitionPosVSD
CurveParams
Curve Settings
Operation Mode
LoadLimits
MinLoadOil
MaxLoadOil
Description
Ignition position of VSD
Setting the postpurge positions for firing on oil
Postpurge position of auxiliary damper (oil)
Postpurge position of auxiliary damper 2
Postpurge position of auxiliary damper 3
Postpurge position of VSD
Program stop
Resetting the ignition positions to invalid value
Setting the curve parameters of ratio control for firing on oil
Selection of burner operating mode (multistage or modulating)
for oil
Setting the minimum and maximum load limits
Minimum load "Low fire" (oil)
Maximum load "High fire" (oil)
Value range Access Default pa- LMV51 LMV52
rights rameter
setting
0..90° Service invalid
10..100 % Service invalid
Service
0..90° Service 0°
0..90° Service 15°
0..90° Service 25°
0..100 %
0..90° Service 25°
0..90° Service 25°
0..100 % Service 50 %
deactivated Service deactivated
24 PrePurgP
32 PreP FGR
36 IgnitPos
44 Interv 1
52 Interv 2
72 PostPPos
76 PostPFGR
Service
Service
Service
Service
Service
Service
Service
Service
Service
Two-stage OEM Modulating
Three-stage
Modulating
Service
0..MaxLoadOil Service 0 %
MinLoadOil..100 % Service 100 %
x
x
x x
x x
x x
x x
x
x
x
x x
x x
x x
x x
x x
x
x
x
x x
x x
x x
x x
x x
x x
133/301
CC1P7550en
13.08.2004