ABB IRC5 Compact Product Manual page 50

2 Installation and commissioning
2.4.2 Mounting the FlexPendant holder
Continued
Mounting the FlexPendant holder
Use this procedure to mount the FlexPendant holder.
1
2
For rack mounted IRC5 Compact, do not place the FlexPendant holder on top
of the rack. Find a solution where the FlexPendant is placed so that it cannot fall
to the floor from a high position.
50
Action
Remove the protective liner from the tape.
Press the mounting plate with FlexPendant
holder against the surface where it should be
mounted.
Note
The surface must be clean and dry.
Note
© Copyright 2009-2017 ABB. All rights reserved.
Note/illustration
xx0500002546
Product manual - IRC5 Compact
3HAC047138-001 Revision: G