ABB IRC5 Compact Product Manual page 183

7
Refitting
Use this procedure to refit the Remote Service box.
1
2
3
4
5
6
7
Product manual - IRC5 Compact
3HAC047138-001 Revision: G
Action
Pull the latch (A) to the left, and push the Remote
Service box out.
Action
DANGER
Before commencing any work inside the cabinet, please observe the safety information
in section DANGER - Make sure that the main power has been switched off! on page
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the unit please read the safety information
in the section WARNING - The unit is sensitive to ESD! on page 34
Pull the latch to the left and push the Remote Service box in position on the mounting
bracket.
Refit the safety board unit and secure it with attachment screws.
Reconnect all connectors to the Remote Service box, Ethernet switch and safety board.
Refit the cabinet cover.
Perform the function tests in section
features work properly.
© Copyright 2009-2017 ABB. All rights reserved.
4.17 Replacement of Remote Service box
Information
A
xx1400001460
Function tests on page 118
4 Repair
Continued
33.
to verify that the safety
183