11.2 Replacing the Control Board
Control Board
(1) Turn OFF the controller.
Removal
(2) Remove the Arm Top Cover.
(3) Disconnect the connector.
(4) Remove the Control board.
Control Board
(1) Mount a new Control board.
Installation
(2) Connect the connector.
(3) Mount the Arm Top Cover.
(4) Turn ON the controller.
LS10-B Rev.6
For details, refer to Maintenance: 3.1 Arm Top Cover.
Connector: X51
Be careful of the board direction.
(Check the board direction by the
connector position.)
Connector: X51
For details, refer to Maintenance: 3.1 Arm Top Cover.
Maintenance 11. Boards
2-M2×16
Pan head screw
Control board
Connector
147