Print Server; Diagnostics - TP-Link TD-W8968 User Manual

Server Name: The name of this Media Server.

To add a new share folder for your media server, please follow the instructions below:
a) Click Add New
b) Enter the name of the share folder in
c) Click Save/Apply
d) Click Scan Now
Auto-Scan, at same time, select an auto scan interval time by drop-down list. In this case,
the media server will auto scan the share folders.

Note:
The max share folders number is 6. If you want share a new folder when the numbers has been
reached to be 6, you can delete a share folder and then add a new one.

4.8.6 Print Server

Go to USB Settings →
There are three states of the print server, they are as follows:
Online: Indicates the print service has been turned on, and no user is using the print

services at present. You can click
Offline: Indicates the print service feature is disabled. You can click

service.
Busy: Indicates the print service has been turned on, but at this moment other users are

using print services.

4.9 Diagnostics

Choose Diagnostics, you will see the Diagnostics screen. This section describes the result of
the test for the ENET (Ethernet) Connection, Wireless Connection and ADSL Synchronization.
You can refer to the Help
Folder, and you will see the screen as shown below.
to apply the configuration.
to scan all the share folders immediately. You can also select the
Print Server, you can configure print server on this page as shown below.
Stop
menu to get more information about the corresponding test.
Share Name field.
to stop the print service.
88
TD-W8968 User Guide
Start to start the print