Quality Of Service - TP-Link TD-W8968 User Manual

Allow: Only allow the PCs to access the specified URL.

Deny: Block the PCs to access the specified URL.

To add a URL Filter entry:
1. Check the Deny
2. Click Add and then you will see the next screen as shown below. Enter the URL Address
and Port Number.
3. Click Save/Apply
Every computer connected to the modem router will not access this URL address on the
port.

4.4.9 Quality of Service

Go to Advanced Setup
screen below. QoS helps to prioritize data as it enters your modem router. By attaching special
identification marks or headers to incoming packets, QoS determines which queue the packets
enter, based priority. This is useful when there are certain types of data you want to give higher
priority, such as voice data packets give higher priority than Web data packets. This option will
provide better service of selected network traffic over various technologies.
Select the Enable QoS
Select a Default DSCP Mark
reference to a particular classifier.
Click Save/Apply to save the current configuration.
or Allow radio button. Here we take
to save this entry and then you will see your settings on URL Filter screen.
→ Quality of Service, you can enable QoS (Quality of Service) on the
checkbox to enable all QoS for all interfaces.
from drop-down list to automatically mark incoming traffic without
Deny for example.
44
TD-W8968 User Guide