TP-Link TD-W8968 User Manual page 54

4.4.11.2 Static Route
Go to Advanced Setup
screen allows you to configure the static routes. A static route is a pre-determined path that
network information must travel to reach a specific host or network.
To add static routing entries:
1. Click Add, and you will see the screen below.
2. Enter the following data:
IP Version: Select the version of IP.

Destination IP Address/prefix length:

network or host that you want to assign to a static route.
Interface: Select the Interface name in the text box, or else, the default Use Interface will be

adopted for the Static Route.
Gateway IP Address:

will display this item. You should type the Gateway address correctly, and the other option
for Interface will adopt the default Gateway address for the Static Route.
3. Click Save/Apply

Note:
Gateway IP address should be correctly configured if IP based Interface (IPoE, IPoA) is
selected.
4.4.11.3 RIP
Go to Advanced Setup
→ Routing → Static
If you select the IPoE or IPoA mode for Interface, the screen above
to save your settings.
→ Routing → RIP, and you can see the screen below.
Route. You can see the Static Route screen, this
The Destination IP Address
50
TD-W8968 User Guide
is the address of the