TP-Link TD-W8968 User Manual page 7

(Wi-Fi)
(WPS)
(USB)
(LAN1-4)

Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to
the Modem Router
If you have already made a right connection, please contact your ISP to make sure if your
Internet service is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off,
please refer to
configuration. You may need to check this part of information with your ISP and make sure
everything have been input correctly. Refer to
The wireless function is enabled but no data is being
On
transmitted.
The wireless function is enabled and the modem router is
Flashing
sending or receiving data over the wireless network.
Off The wireless function is disabled.
On
A WPS synchronization is established.
A wireless device is trying to connect to the network via WPS.
Flashing
This process may take up to 2 minutes.
A WPS synchronization has been established for more than 5
Off minutes or a WPS synchronization failed. Please refer to
WPS Setup
The USB device is identified and ready to use.
On
The modem router is sending or receiving data over this USB
Flashing
port.
Off No USB device is plugged into the USB port.
On
The corresponding LAN port is connected.
The modem router is sending or receiving data over this LAN
Flashing
port.
Off
The corresponding LAN port is not connected.
for more information about how to make Internet connection correctly.
Note 1. If your ADSL LED is GREEN ON, please check your Internet
for more information.
4.2 Device Info for more information.
3
TD-W8968 User Guide
4.7.2.1
2.2 Connecting