TP-Link TD-W8968 User Manual page 44

Change Policy: There are two policies for the MAC filters:

Select the Change
When you set FORWARDED, it means that all MAC layer frames will be
those matching with any of the specified rules in the table. While
MAC layer frames will be
the preceding table.
Add: Click Add, and then you can add a new MAC Filter in the next screen.

Remove: Select the check box in the table and then click Remove, and then the

corresponding entry will be deleted in the table.
To add a MAC Filtering rule:
1. Click Add, and you will see the similar screen below.
2. Select Protocol Type
3. Enter Destination MAC Address
4. Select Frame Direction
5. Select the WAN interfaces
6. Click Save/Apply
screen.
checkbox and click
blocked except those matching with any of the specified rules in
in the drop-down list for the rule.
and Source MAC Address
in the drop-down list for the rule.
from the drop-down list.
to save this entry and then you will see your settings on the Mac Filtering
Change Policy to change from one policy to another.
in the text box.
40
TD-W8968 User Guide
FORWARDED and BLOCKED.
forwarded
BLOCKED means that all
except