TP-Link TD-W8968 User Manual page 45

4.4.7.3 ARP Binding
Go to Advanced Setup
function allows you to bind network device's IP address to its MAC address, and prevents ARP
spoofing and other ARP attacks.
To bind a connected network device's IP address and MAC address:
1. Select the entry of the connected device's MAC Address and IP Address in ARP List as
shown below.
2. Click Load Selected
shown below.
3. Click Enable to bind the device's MAC address to its IP address.
→ Security →ARP Binding, and you will see the ARP Binding screen. This
and the device's information will appear on the ARP Binding table as
41
TD-W8968 User Guide