Print Server; Nat - TP-Link Archer C50 User Manual


Note:
The max share folders number is 6. If you want share a new folder when the number has been
reached to be 6, you can delete a share folder and then add a new one.
4.10.6

Print Server

Choose menu "USB Settings→Print Server", you can configure print server on this page as
shown below.
There are two states of the print server, they are as follows:
Online - Indicates the print service has been turned on, and no user is using the print service

at present. You can click the "Stop" button to stop the print service.
Offline - Indicates the print service feature is disabled. You can click "Start" button to start the

print service.

4.11 NAT

Choose "NAT", and you can enable or disable the NAT and Hardware NAT Control feature. The
NAT Rules and Hardware NAT will work properly only when the NAT Control feature is enabled.
Enable NAT Control - If enabled, the NAT function and the Forwarding configuration will

take effect.
Disable NAT Control - If disabled, neither NAT function nor Forwarding configuration will

take effect.
Enable Hardware NAT Control - If enabled, the Hardware NAT feature will take effect.

Archer C50
Figure 4-59 Pint Server Setting
Figure 4-60 The Forwarding menu
- 75 -
AC1200 Wireless Dual Band Router