Note:
If you want to change the default settings of
VPN server endpoints use the same Encryption Algorithm, Integrity Algorithm, Diffie-Hellman
Group and Key Life time in both
4.4.18 Multicast
Go to
Advanced Setup
Click
Apply/Save
to save your settings.
4.5 IPTV
Choose IPTV, and you will see the screen below.
Enable IPTV:
Check this box to enable IPTV. If this checkbox is selected, please set the
following parameters as shown in the figure below. Make sure the following settings are
correct.
VPI (0~255):
Identifies the virtual path between endpoints in an ATM network. The valid
range is from 0 to 255. Please input the value provided by your ISP.
phase1
and phase2.
→ Multicast, you can configure the IGMP protocol on the screen.
Advanced
Settings, please make sure that both
60
TD-W8968 User Guide