TP-Link TD-W8968 User Manual page 80

Wireless access can be filtered by using the MAC addresses of the wireless devices
transmitting within your network's RADIUS. To filter wireless users by MAC Address, either
permitting or blocking access. If you do not wish to filter users by MAC Address, select
Disabled.
Select SSID: Select the SSID of the wireless network in which you want to use the MAC

Filter function.
Disabled: Select this option to disable MAC Filter function.

Allow: Select this option to enable MAC Filter function that allows wireless access by the

devices listed on this screen.
Deny: Select this option to enable MAC Filter function that blocks wireless access from the

devices listed on this screen.
Add: Click this button to add the MAC Address.

Remove: Select the item of the MAC Address and click this button to remove it.

When you click Add, the pop-up picture shown below, and then you can type the MAC
Address in the MAC Address

Note:
The form of MAC Address must be xx:xx:xx:xx:xx:xx, like 00:13:0A:55:FF:09.
When you finished making changes to the MAC Filter List screen, click
changes.
field.
76
TD-W8968 User Guide
Save/Apply to save the