TP-Link TD-W8968 User Manual page 52

Save/Apply: Click this button to make the configuration take effect.


Note:
The Total Upstream Bandwidth and Total Downstream Bandwidth are required to be
configured.
4.4.10.1 Rules List
Go to Advanced Setup
shown below. This page allows you to view and configure TC rules.
To add a TC rule, click
Rule Status: Select the status of the rule from the drop-down list to enable or disable the

rule.
IP Range: Enter a single IP address or a range of IP addresses.

Port Range: Enter a single port or a range of ports.

Protocol: Select a protocol type from the drop-down list. TCP, UDP and TCP/UDP are

available here.
Priority: Select priority form the drop-down list. There are five options: Highest, 1, 2, 3, 4, 5,

6 and Lowest. The default precedence of the rule is 4.
Upstream: Enter the min and max upload speed through the WAN port.

Downstream: Enter the min and max download speed through the WAN port.

→ Bandwidth Control
Add and you can configure it on the screen below.
→ Rules List and then you will see the screen as
48
TD-W8968 User Guide