TD-W8968 User Guide
Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).
4.4.12 DNS
When you select the connection type PPPoE,
PPPoA
or
IPoA
for WAN configuration, you will
see the
DNS
menu which includes
DNS Server
and
Dynamic DNS
submenus.
4.4.12.1 DNS Server
Go to
Advanced Setup
→
DNS
→
DNS
Server, and you can see the
DNS Server Configuration
screen below.
For PPPoA, PPPoE enabled PVC(s), please select the
Select DNS Server Interface from
available WAN interfaces
checkbox. This modem router will accept automatically the first
received DNS assignment from the selected configured WAN interface during the connection
establishment.
For single PVC with IPoA, static IPoE protocol, please select the
Use the following Static DNS IP
address
checkbox, and enter the primary and /or optional secondary DNS server IP addresses
provided by your ISP.
51