Select A Mac Acl For A Wifi Network - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic > Wireless Settings.
The Wireless Settings page displays.
5. Click the > Advanced tab.
The page expands.
6. Under DHCP Offer Broadcast to Unicast, select one of the following radio buttons:
• Enable. The access point forwards DHCP offer messages as unicast packets. This
is the default selection.
• Disable. The access point forwards DHCP offer messages as broadcast packets.
7. Click the Apply button.
Your settings are saved

Select a MAC ACL for a WiFi network

After you set up one or more local MAC access control lists (ACLs, also referred to as
access lists; see Manage local MAC access control lists on page 111), you can select an
ACL for use with an SSID. Only WiFi devices for which the MAC address is on the MAC
ACL can connect to the access point through this SSID. (These devices might be able
to connect to the access point through another SSID if you did not set up MAC ACL
security for that SSID.)
You can also set up a RADIUS server (see Set up RADIUS servers on page 124) and select
the RADIUS MAC ACL. You must define the ACL on the RADIUS server, using the
following format for client MAC addresses in the RADIUS server: If the client MAC
address is 00:0a:95:9d:68:16, specify it as 000a959d6816 in the RADIUS server.
Manage the Basic WiFi Features 73 User Manual