Enable The Dhcp Client - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
5. Select the Disable radio button.
The fields are now unmasked.
6. Specify the settings that are described in the following table.
Setting
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
7. Click the Apply button.
Your settings are saved. The access point restarts with the new IP settings.

Enable the DHCP client

By default, the DHCP client of the access point is enabled and the access point receives
an IP address from a DHCP server (or a router that functions as a DHCP server) in your
network.
If you disabled the DHCP client, you can reenable it.
Manage the Local Area Network
and IP Settings
Description
IP address in the range that is used by your LAN (usually 255.255.255.0).
The subnet mask must be compatible with your LAN.
IP address of the gateway on your LAN.
IP address of the primary Domain Name System (DNS) server on your LAN.
IP address of the secondary DNS server on your LAN, or leave this field blank.
129 User Manual