Technical Specifications - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual

Technical specifications

The following table shows the technical specifications of the access point.
Table 4. Technical specifications
Feature
WiFi modes
Maximum theoretical
throughput
Maximum number of
supported clients
802.11 security
WiFi standards
WiFi streams
Operating frequency
ranges
Power over Ethernet
PoE consumption
Power adapter
Factory Default Settings and
Technical Specifications
Description
2.4 GHz radio: 802.11ax, 802.11ng, 801.11bg, and 802.11b
5 GHz radio: 802.11ax, 802.11ac, 802.11na, and 802.11a
The access point supports 2.4 GHz and 5 GHz concurrent operation
About 1800 Mbps simultaneous throughput (600 Mbps in the 2.4 GHz band and
1200 Mbps in the 5 GHz band)
Note: Throughput can vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
affect the data throughput rate.
2.4 GHz radio: 200
5 GHz radio: 200
Even though each radio can support 200 clients, the access point can support a
maximum of 250 clients with both radios enabled.
WPA3 Personal, WPA3/WPA2 Personal, WPA2 Personal, WPA2/WPA Personal, and
WPA2 Enterprise
IEEE 802.11ax (WiFi 6)
WiFi Multimedia Prioritization (WMM)
Wireless distribution system (WDS)
Four streams:
2.4 GHz radio: two streams
5 GHz radio: two streams
2.412–2.472 GHz
5.180–5.240 GHz
5.260–5.230 GHz
5.500–5.700 GHz
If you do not use a power adapter, the PoE port requires 802.3at (PoE+) power but
might also function with 802.3at (PoE) power. We recommend that you use 802.3at
(PoE+) power.
Note: PoE might be considered a network environment 0 per IEC TR 62101, and
thus the interconnected ITE circuits might be considered safety extra low voltage
(SELV).
15.5W
12 VDC, 2.5A
The plug is localized to the country of sale.
Note: The power adapter is not included but can be ordered as an option.
236 User Manual