Return The Access Point To Its Factory Default Settings - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Select Management > Maintenance > Reset > Reboot AP.
The Reboot AP page displays.
5. Click the Enable Scheduled Reboot button so that the button displays blue.
The scheduling controls display.
6. Select the check box for the day on which you want the access point to reboot.
You can select multiple days.
7. Using the Start Time menus, specify the hour and minutes for the time at which the
access point must reboot.
Specify the hour in 24-hour format.
8. Click the Apply button.
Your settings are saved.
Return the access point to its factory default
settings
Under some circumstances (for example, if you lost track of the changes that you made
to the access point settings or you move the access point to a different network), you
might want to erase the configuration and reset the access point to factory default
settings.
If you do not know the current IP address of the access point, first try to use an IP scanner
application to detect the IP address before you reset the access point to factory default
settings.
Note: You can also use the NETGEAR Insight app to discover the IP address that is
assigned to the access point. For more information, see Connect over WiFi using the
NETGEAR Insight app on page 22.
To reset the access point to factory default settings, you can use either the Reset button
on the access point or the use the erase function in the local browser UI. However, if
you cannot find the IP address or you lost the password to access the access point, you
must use the Reset button.
Manage and Maintain the Access
Point
160 User Manual