Use The Local Browser Ui To Reset The Access Point - NETGEAR WAX610 User Manual

Insight managed wifi 6 ax1800 dual band access point
Hide thumbs Also See for WAX610:
Table of Contents

Advertisement

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
Note: If you hold the Reset button for less than 10 seconds and then release it, the
access point reboots rather than returns to its factory default settings.
3. Release the Reset button.
The configuration is reset to factory default settings. When the reset is complete,
the access point reboots. This process takes about two minutes.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the reset.
Do not turn off the access point. Wait until the access point finishes restarting and
the Power/Cloud LED turns solid green or solid blue.

Use the local browser UI to reset the access point

You can use the access point's local browser UI to return the access point to its factory
default settings.
CAUTION:
This process erases all settings that you configured in the access point.
To erase the settings:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 37.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Select Management > Maintenance > Reset > Restore Defaults.
The Restore Defaults page displays.
Manage and Maintain the Access
Point
162
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents