View Or Change The Settings Of A Wifi Network - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
12. To configure configure a captive portal, a MAC ACL, and bandwidth rate limits, see
the information in the following sections:
• Set Up and Manage a Captive Portal on page 91
• Manage local MAC access control lists on page 111 and Select a MAC ACL for a
WiFi network on page 73
• Set bandwidth rate limits for a WiFi network on page 75
Although you could also configure these features while you set up a WiFi network,
these features are more complicated and therefore described separately.
13. Click the Apply button.
Your settings are saved.
14. Make sure that you can connect to the new WiFi network.
If you cannot connect to the new WiFi network, check the following:
• If your WiFi-enabled computer or mobile device is already connected to another
WiFi network in your area, disconnect it from that WiFi network and connect it to
the correct WiFi network. Some WiFi devices automatically connect to the first
open network without WiFi security that they discover.
• If your WiFi-enabled computer or mobile device is trying to connect to your
network with its old settings (before you changed the settings), update the WiFi
network selection in your WiFi-enabled computer or mobile device to match the
current settings for your network.
• Does your WiFi device display as a connected client? (See View client distribution,
connected clients, and client trends on page 176.) If it does, it is connected to the
network.
• Are you using the correct WiFi network name (SSID) and password?
• If the WiFi authentication and encryption is set to WPA3 Personal, make sure that
the WiFi adapter device driver is updated to the latest version on your
WiFi-enabled computer or mobile device.
View or change the settings of a WiFi
network
You can view or change the settings of the default WiFi network (SSID or VAP) or any
custom WiFi network.
Manage the Basic WiFi Features 57 User Manual