Table of Contents
Advertisement
Configuring VPIM settings
About this task
Using the VPIM protocol, HMS 400 can exchange messages with a Call Pilot or another HMS
400 system on the same network. Configure the VPIM settings to permit the HMS 400 to
communicate with other systems.
Important:
You cannot send messages using Outlook Express to HMS 400 as it does not conform to
VPIM Protocol.
Procedure
1. On the Web Configuration main navigation bar, select System Configuration.
2. In the System Configuration navigation, in the System Settings section, click
3. On the VPIM Setting page,under the Configuration for HMS (Local) section, in
4. In the Domain box, type the HMS 400 domain name.
5. In the VCard Directory box, type the folder name of the VPIM Card.
6. In the FQDN Authorization box, select True or False.
7. Click Save to save your changes.
8. In the Configuration for CallPilot/HMS section, in the Prefix box, type the prefix
9. In the PSTN box, type the PSTN number to where to send a message.
10. In the Domain box, type the VPIM domain name.
11. Click Save to save your changes.
Avaya Hospitality Messaging Server 400 Installation and Commissioning
VPIM Setting.
the PSTN box, type the PSTN number for HMS 400.
number for the VPIM shortcut.
The prefix number is compared to existing extension numbers in the database. If
you enter a prefix number that is the same as an existing number, an error occurs
and you must change the prefix value.
Configuring VPIM settings
March 2012
85
Advertisement
Table of Contents
