Table of Contents
Advertisement
Procedure
1. On the Web Configuration main navigation bar, select System Configuration.
2. In the System Configuration navigation, click HMS400 Server Setting.
3. In the HMS400 Server Setting window, in the HMS400 TCP/IP Setting section,
4. In the New HMS400 IP box, type the HMS 400 IP (TLAN) address.
5. Click Update to save your changes, or click Cancel to discard your changes.
6. In the SNMP Setting section, click Edit.
7. In the New SNMP Manager IP box, type the SNMP Manager IP address.
8. (Optional) In the Port No box, type the SNMP port number if it is required.
9. Click Update to save your changes, or click Cancel to discard your changes.
Configuring the SIP Setting
About this task
Configure the SIP setting.
Prerequisites:
• The SIP Server IP is the CS 1000 TLAN Node IP address.
Procedure
1. On the Web Configuration main navigation bar, click System Configuration.
2. In the System Configuration navigation, click SIP Setting.
3. To change the Node IP address or the NRS IP address/Domain Name, in the SIP
4. For Transport Protocol, select TCP or UDP.
5. In HMS Pilot Number, type in the extension number.
6. In New HMS 400 IP (TLAN), type the HMS 400 server IP address.
7. Click Update to save your changes.
Avaya Hospitality Messaging Server 400 Installation and Commissioning
click Edit.
Setting section, in the CS 1000 Node IP/CM IP box, type the new CS 1000 Node/
NRS IP address or NRS Domain Name.
The current CS 1000 Node IP/CM IP field displays the current CS 100 Node/NRS
IP address or NRS Domain Name.
Server configuration procedures
March 2012
67
Advertisement
Table of Contents
