Table of Contents
Advertisement
CS 1000 configuration
16. In the Private Network Identifier (PNI) box, type a value for the private network
17. In the Call Type for outgoing direct dialed TIE route (CTYP) list, select Unknown
18. Select the Insert ESN Access Code (INAC) check box.
19. Click Save.
Creating virtual trunks (LD 14)
About this task
Create a virtual trunk for LD 14 in the CS 1000 Element Manager.
Prerequisites:
• Log on to the CS 1000 Element Manager.
Procedure
1. In the Element Manager navigation pane, select Routes and Trunks > Routes and
2. Expand the desired Customer Number.
3. Under the Customer number, click Add trunk beside the route to which you want
4. On the New Trunk Configuration page, select Multiple trunk input number
5. In the Trunk data block (TYPE) list, select IP Trunk (IPTI).
6. In the Terminal Number (TN) box, type the trunk terminal number.
7. In the Designator field for trunk (DES) box, type a meaningful name for the
8. Make sure that Extended Trunk (XTRK) is Virtual trunk (VTRK).
9. In the Route number, Member number (RTMB) box, type the route number and
10. In the Start arrangement Incoming (STRI) list, select Immediate (IMM).
28
Avaya Hospitality Messaging Server 400 Installation and Commissioning
identifier.
Call type (UKWN).
The route you created appears on the Route and Trunks page.
Trunks.
The Routes and Trunks page appears.
to add the trunk.
The New Trunk Configuration page appears.
(MTINPUT) if you configure multiple trunks.
The maximum number of trunks is 32.
trunk.
member number separated by a space.
Comments? infodev@avaya.com
March 2012
Advertisement
Table of Contents
