Creating A Virtual Disk - Avaya Converged Platform 130 Series Installing Manual

3. Under Controller Properties, set Auto Import Foreign Configuration to Enabled.
4. Click Apply Changes.
5. Scroll down and click OK.
6. Click Back.
Next steps
Proceed to

Creating a virtual disk

the RAID level, physical disks, and virtual disk parameters.
Creating a virtual disk
About this task
Use this procedure to create a virtual disk by selecting the RAID level, physical disks, and virtual
disk parameters.
Before you begin
• Delete all existing configurations on the RAID controller.
• Configure the controller properties.
• Ensure that Auto Import Foreign Configuration is set to Enabled.
October 2019
on page 71 for the steps to create a virtual disk by selecting
Installing the Avaya Converged Platform 130 Series
Comments on this document? infodev@avaya.com
Dell USB R640 RAID Configuration
71