General Cleaning; General Care; Belt/Deck/Roller Lubrication - Master F-08 Manual

WARNING: UNPLUG POWER CORD BEFORE MAINTENANCE.
WARNING: STOP TREADMILL BEFORE FOLDING.

4.1 General Cleaning

 Use a soft, damp cloth to wipe the edge of the belt and the area between the belt edge
and frame. A mild soap and water solution along with a nylon scrub brush will clean the
top of the textured belt. This task should be done once a month. Allow to dry before using.
 On a monthly basis, vacuum underneath your treadmill to prevent dust build up. Once a
year, you should remove the black motor shield and vacuum out dirt that may accumulate.

4.2 General Care


Check parts for wear before use.

Always replace the mat if worn and any other defective parts.

If in doubt do not use the treadmill and contact our helpline.
TAKE CARE TO PROTECT CARPETS AND FLOOR in case of leakages. This product is a
machine that contains moving parts which have been greased / lubricated and could leak.

4.3 Belt/Deck/Roller Lubrication

The mat/deck friction may play a major role in the function and life of your treadmill and that is
why we recommend you constantly lubricate this friction point to prolong the useful life of your
treadmill.
Lubrication is provided with this unit. You should apply the enclosed lubrication after
approximately the first 40 hours of operation. We recommend lubrication of the deck according
to the following timetable:
Light use (less that 3 hours per week) every 6 months
Medium use (3-5 hours a week) every 3 months
Heavy use (more than 5 hours per week) every 6-8 weeks.
See below procedures for lubricating:
1. Use a soft, dry cloth to wipe the area between the belt and deck.
2. Spread lubricant onto the inside surface of belt and deck evenly (make sure the machine is
turned off and power is disconnected).
EN