Getting Started; Maintenance - Master F-08 Manual

(6) ON/OFF
Power on the machine, press it to start running. When running, press it to stop and record the
running.
(7) SPEED +
When running, press it to increase speed. Hold on it, speed is increased continuously.
(8) SPEED –
When running, press it to decrease speed. Hold on it, speed is deceased continuously.

3.2 Getting Started

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor shield. Ensure that the safety key is
installed, as the treadmill will not power on without it. When the power is turned on, the display
is ready for operation.

4. MAINTENANCE

Reasonable cleaning/lubricating should be made to extend the life time of this unit. Performance
is maximized when the belt and mat are kept as clean as possible.
WARNING: THE MAT/DECK FRICTION MAY PLAY A MAJOR ROLE IN THE FUNCTION
AND LIFE OF YOUR TREADMILL AND THAT IS WHY WE RECOMMEND YOU
CONSTANTLY LUBRICATE THIS FRICTION POINT TO PROLONG THE USEFUL LIFE OF
YOUR TREADMILL. FAILING TO DO THIS MAY VOID YOUR WARRANTY.
EN