Important Electrical Information - Master F-08 Manual

1.1 IMPORTANT ELECTRICAL INFORMATION

WARNING!
 NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the
power cord away from any moving part of the treadmill including the elevation mechanism
and transport wheels.
 NEVER remove any cover without first disconnecting AC power.
1.2 IMPORTANT OPERATION INSTRUCTIONS
 Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key. The computer will obey
the command gradually.
 Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or
stray from walking in the centre of the belt; which may result in serious injury.
 In order to prevent losing balance and suffering unexpected injury, NEVER mount or
dismount the treadmill while the belt is moving. This unit starts with a very low speed.
Simply standing on the belt during slow acceleration is proper after you have learned to
operate this machine.
 Always hold on to handrail while making control changes.
 A safety key is provided with this machine. Remove the safety key will stop the walking
belt; the treadmill will shut off automatically. Insert the safety key will reset the display.
 Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure.
EN