Table of Contents
Advertisement
B B B B
Select the original type you re-
quire, and then press [OK].
Image Density (Contrast)
The text and diagrams in your origi-
nal should stand out clearly from the
paper they are written on. If your
original has a darker background
than normal (for example, a newspa-
per clipping), or if the writing is faint,
adjust the image density.
❖ ❖ ❖ ❖ Auto Image Density
The appropriate density setting for
the original is automatically select-
ed.
❖ ❖ ❖ ❖ Manual Image Density
Use manual image density to set
image density yourself.
❖ ❖ ❖ ❖ Combined Auto and Manual Image
Density
You can adjust image density for
only photographs, illustrations or
diagrams when the original has a
dark background.
Note
❒ You can select the image density
that is selected right after the ma-
chine is turned on or modes are
cleared with [Gen. Settings/Adjust].
See p.102 "General Settings/Ad-
justment", Facsimile Reference (op-
tion) <Advanced Features> .
❒ You can set whether the machine
returns to the image density de-
fault setting after every transmis-
sion with [Gen. Settings/Adjust]. See
p.102 "General Settings/Adjust-
ment", Facsimile Reference (option)
<Advanced Features> .
A A A A
Selecting the type of image densi-
ty.
Auto Image Density
A Make sure that [Auto Image Den-
sity] is selected.
Note
❒ If [Auto Image Density] is not
selected, press [Auto Image
Density].
Manual Image Density
A Make sure that [Auto Image Den-
sity] is not selected. If it is se-
lected, press [Auto Image Density]
to turn it off.
Note
❒ If [Auto Image Density] is not
selected, go to step B.
Scan Settings
2
27
Advertisement
Table of Contents
