Table of Contents
Advertisement
Registering
❒ If the destination is pro-
grammed with the Quick
Dial Table, press [Clear] or
the { { { { Clear/Stop} } } } key to cancel
programming, and then pro-
gram with the destination
key again. You can cancel
programming also by press-
ing the destination key.
❒ Press [Adv. Features] to edit
SUB, SID, SEP, PWD, sub-ad-
3
dress or UUI. See p.35 "Ad-
vanced Features", Facsimile
Reference (option) <Advanced
Features> .
❒ You can select a line type for
each destination when the
optional ISDN Unit or the
optional Extra G3 Interface
Unit is installed. Press [Select
Line] to select a line type. p.43
"Changing the Line Type",
Facsimile Reference (option)
<Advanced Features> .
❒ To edit another destination,
press [Dest. List] and proceed
from step A.
Adding destinations
A Press [Add].
B Add the destination using the
number keys or a Quick Dial
key.
46
Note
❒ To add another destination,
press [Dest. List] and proceed
from step A.
❒ You also can cancel program-
ming by pressing the Quick
Dial key of the destination to
be added.
❒ When you add the destina-
tion using the number keys,
press [Adv. Features] to pro-
gram SUB, SID, SEP, PWD,
sub-address or UUI. See p.35
"Advanced Features", Fac-
simile Reference (option) <Ad-
vanced Features> .
❒ You can select a line type for
each destination when the
optional ISDN Unit or the
optional Extra G3 Interface
Unit is installed. Press [Select
Line] to select a line type. See
p.43 "Changing the Line
Type", Facsimile Reference (op-
tion) <Advanced Features> .
C C C C
Press [OK].
If you press [Cancel], the group is
not changed. The display appears
A
as in step
.
D D D D
Press [Exit] twice.
The machine will return to standby
mode.
Advertisement
Table of Contents
